Socket Jenie Sockets

 STOP CRANKING! AND REPLACE THE CRANK!
USE A BATTERY OPERATED DRILL OR SCREWDRIVER WITH A SOCKET JENIE USED ON POP- UP ROOF CAMPER JACKS AND 5TH WHEEL OR STABILIZER JACKS
 

THE QUICK WAY TO LOWER OR RAISE YOUR CAMPER ROOF OR JACKS
Several years ago it became apparent that the down sizing of the American vehicles was destined to cause the pop up trailer to increase in demand. A study was initiated to see if hydraulics or other convenience devises could be developed for this part of the RV industry. The result was the development of a miniature hydraulic system to level the fold down camper, a variation of the hydraulic system to raise the roof on the pop up vehicle, and a family of special sockets to raise and lower the roof and stabilizer jacks. Variations of the Socket Jenie product line also will operate levelers and jacks for 5th wheel and truck insert campers.

As the dealers and customers requested sockets for other applications, the original design evolved into a combination roof and stabilizer jack design, rear 5th wheel leveling jacks, travel trailer scissor jacks, and truck camper insert jacks. The socket is made from a single piece of steel, and the stem has been specially machined to eliminate slipping in the rill chuck. Due to the rugged construction of the socket, it has a lifetime warranty.

To use the sockets that raise and lower the pop up camper roof, a drill with a 1/2" chuck is required. For other sockets the stem is designed identical to the roof socket, however the size of the stem has been reduced to fit a 3/8" drill chuck.

STARCRAFT POP-UP MODELS
The Socket Jenie family of sockets designs grows everyday with the help and criticisms of everyday people. The newest socket will fit any Starcraft produced prior to 2002 that has an oval shaped crank socket. This design is similar to other sockets that raises and lowers the roof, and requires a 1/2" drill chuck. It is made from a single piece of steel, and has a special machined shank that will not slip in the drill chuck. Other sockets we offer will fit Viking, Clipper, Rockwood, Venture, Coleman Pop-Up Campers, stabilizer jacks, & more.

 

If you are unsure which is the correct Socket Jenie for your camper, please fill out the following form: Socket Jenie Part Number Identification (pdf) and email to info@customcylindersintinc.com before ordering.

 

The LVSG-630 and The LVSG-877, LVSG-876, LVSG-875 are not interchangeable. You must buy both; the LVSG-630 is for the jacks and the others are for the Roof systems. This was done because customers were over cranking the jacks.


Socket Jenie Products

We want to hear from you.