SOCKET JENIE LVSG-876 RAISING & LOWERING FOLD DOWN CAMPER ROOFS

$27.55
SKU: LVSG-876
List price: $0.00
Price: $27.55
Weight: 1 lb
Dimensions: 11 in × 2 in × 2 in

SOCKET JENIE LVSG-876 FOR RAISING & LOWERING FOLD DOWN CAMPER ROOFS THAT USE A 7/8" ROUND CRANK (Free length of socket body=8 1/8") This socket requires a 1/2" drill chuck, and must be used with a low RPM/ high torque drill motor. A general drill would be: 110V drill should not be less than 5 amps, while a battery powered drill should be 24V. Due to the wide variety of roof system designs used for fold down camper vehicles, the general recommendations may not be required for your specific vehicle. It is suggested that the 110V or cordless drill have the extra front mounted handle to control the torque required to raise or lower the roof. The free length of this socket represents the distance that the crank inserts into the camper body to operate the roof. The portion of the socket that fits into the drill chuck is not included in the free length. KNOWN BRANDS THAT USE THIS SOCKET: Fleetwood & Coleman. NOTE: Fleetwood campers manufactured after 2004 increased the distance of the bumper from the body by 3". To make certain that this design will fit your camper it is necessary that the amount of crank inserted into the camper body be carefully measured. The body of this socket is slightly over 8", and has a 1" extension that fits into the drill chuck.

We want to hear from you.